Our enclosed switching power supply (90-132 VAC or 170-264 VAC) unit allows the alternating current to become direct current, being ideal to provide a reliable and constant source of electricity for LED products. Its function is to ensure that the LED does not receive peaks of voltage or current thanks to the components it’s built with. This is ideal for Industrial, Commercial or Household Indoor applications.

Switch Power Supply: Switch Mode Power Supplies, or SMPS, are becoming frequently sought out for and in most cases, have replaced the traditional linear ac-to-dc power supplies as a way to cut power consumption, reduce heat dissipation, as well as size and weight.

Switch-mode power supplies can now be found in most PC’s, power amplifiers, TV’s, dc motor drives, etc., and almost anything that requires a highly efficient supply as switch-mode, power supplies are increasingly becoming a much more mature technology. The major advantage of the switch mode power supply is its higher efficiency, compared to standard linear regulators

Highlights:

Suitable For DC 12/24V Devices: The DC 12V power supply is suitable for devices that require an operating voltage of DC 12/24V, a power consumption of 150W, and a current of 12.5A or less, a perfect fit could be LED strips or desk table lights.

Various Applications: The DC 12V 12.5A Power Supply is ideal to make connections that require 150W of power consumption. It is especially recommended for small sections of LED Light Strips, small sections of LED modules, low power consumption wall washers, and other DC 12/24V products. It can also be good for some small electronic appliances and you can use the 12/24V transformer to perfectly replace a broken original charger.

For Indoors & Reliable: It is a universal 150W power supply, NON-waterproof, store it in a dry place and away from heat, risk of electric shock, and short circuit protection, continuous working 24hrs have NO damage at the output current of 12.5A/6.25A.

More Safety: Protection of Integral short circuit, overload, and overvoltage. NO spark when it plugs in, NO getting too warm, NO need to worry about any fires, explosions or shocks occurring or harm coming to the kids and yourself.

Notes:

■ For optimum performance, do not exceed maximum load, the unit will be turned off in case of faults and overloads to protect the unit and connected equipment.

■ For best use, the Power Supply should be 20% (approx.) higher (Watts/Amps) than the total required to run your system.

■ The power supply is considered as a component that will be operated in combination with final equipment.

■ Before power on, please check the input voltage switch to avoid damage.

■ Suitable for indoor use only.

■ Warranty for 2 years.